6X9 Speaker Template

6X9 Speaker Template

Agreedm but i already have the speaker and don't want to spend on an upgrade yet. Install was a snap, took about 1 hour to do all four doors. Yea i'd recommend the jbl's out of those two. Not too difficult, and not too expensive. 6x9 to 6.5 speaker template thread starter xdatx;

6X9 Speaker Template

I want to get all of the bass out of the 6x9's thats why im going ported. Use the 6x9 as a template and outline it on the wood; It doesnt have cutouts for 6x9's in it so im just making boxes. Below are what i believe to be the correct parts. 06 nismo cc 4x4 :

6x9 Speaker Box Template

Anything will be an improvement over stock so just find a good reputable company and enjoy. Use your factory speaker as the template. Draw the mounting hole for the 6.5 on the template; 06 nismo cc 4x4 : I got 2 6x9's im about to put in my single cab truck.

6X9 Speaker Template

Use your factory speaker as the template. I would drill the 6x9 chassis to fit the factory mounting holes rather than drill more holes in the vehicle. 06 nismo cc 4x4 : Use the 6x9 as a template and outline it on the wood; Install was a snap, took about 1 hour to do all four doors.

6X9 Speaker Template

Use the 6x9 as a template and outline it on the wood; It's a leftover from my previous setup and the car i'm using now has a 6x9 slot. Use the stock 6x9 mount for a template and mount to it. I want to get all of the bass out of the 6x9's thats why im going ported. That said,.

6X9 Speaker Template - The way i've done this in the past is: Some 6x9's have extra holes in the chassis and sometimes slots. Start date jul 14, 2009; Install was a snap, took about 1 hour to do all four doors. Anything will be an improvement over stock so just find a good reputable company and enjoy. If you prefer to use aftermarket speaker adapters and harnesses, metra offers several products for this.

It may only be a matter of enlarging the holes in the new 6x9 with a bigger drill bit so that you can get the mounting screw in place. That said, i think there are some ribs on the backside of that speaker grill that vary in thinckness. Mount the 6.5 on the template; What i really need to know is how do i fit the new 6.5 speaker into the template, i thought about it and i. Draw the mounting hole for the 6.5 on the template;

I'm Going Also Put Mounts On Them So I Can Take Them Out Of The Cab And Hook Them On The Bed Whenever Im Hanging Out At The Beach.

It may only be a matter of enlarging the holes in the new 6x9 with a bigger drill bit so that you can get the mounting screw in place. Agreedm but i already have the speaker and don't want to spend on an upgrade yet. Use the stock 6x9 mount for a template and mount to it. It doesnt have cutouts for 6x9's in it so im just making boxes.

Draw The Mounting Hole For The 6.5 On The Template;

I got 2 6x9's im about to put in my single cab truck. Get a piece of 1/4 mdf, or similar wood; I love the way they sound, i found both sets for $100 so that was reasonable. I would drill the 6x9 chassis to fit the factory mounting holes rather than drill more holes in the vehicle.

6X9 To 6.5 Speaker Template Thread Starter Xdatx;

It's a leftover from my previous setup and the car i'm using now has a 6x9 slot. Yea i'd recommend the jbl's out of those two. Some 6x9's have extra holes in the chassis and sometimes slots. If you prefer to use aftermarket speaker adapters and harnesses, metra offers several products for this.

The Way I've Done This In The Past Is:

I have an avic d3 and pioneer 3way 6x9's up front and 3way 6.5's in the rear (also pioneer). I want to get all of the bass out of the 6x9's thats why im going ported. That said, i think there are some ribs on the backside of that speaker grill that vary in thinckness. Use your factory speaker as the template.